A module for the Bitnami Coppermine Stack, which greatly simplifies the installation of Coppermine. Jan 20th 2020, 17:56 GMT. 565 downloads; Bitnami Zurmo Module 3.2. Bitnami Coppermine Module is a free and multiplatform software project, a module for the Bitnami LAMP, WAMP and MAMP stack, specially designed for the Coppermine web-based application.
NOTE: We are in the process of modifying the file structure and configuration for many Bitnami stacks. On account of these changes, the file paths stated in this guide may change depending on whether your Bitnami stack uses native Linux system packages (Approach A), or if it is a self-contained installation (Approach B). To identify your Bitnami installation type and what approach to follow, run the command below:
The output of the command indicates which approach (A or B) is used by the installation, and will allow you to identify the paths, configuration and commands to use in this guide. Refer to the FAQ for more information on these changes.
NOTE: We are in the process of modifying the configuration for many Bitnami stacks. On account of these changes, the file paths and commands stated in this guide may change depending on whether your Bitnami stack uses MySQL or MariaDB. To identify which database server is used in your stack, run the command below:
The output of the command indicates which database server (MySQL or MariaDB) is used by the installation, and will allow you to identify which guides to follow in our documentation for common database-related operations.
Check logs
Before trying to recover a MySQL or MariaDB database, you should check the exact error in the log file. Depending on whether your system uses MySQL or MariaDB, follow the steps below:
MySQL
To check the latest entries in the MySQL log file, run the command below:
For Bitnami installations following Approach A (using Linux system packages):
For Bitnami installations following Approach B (self-contained installations):
MariaDB
To check the latest entries in the MariaDB log file, run the command below:
For Bitnami installations following Approach A (using Linux system packages):
For Bitnami installations following Approach B (self-contained installations):
Restart and repair the database
Bitnami Stacks
Assume the following error in the log file: Texa driver.
MySQL
The MySQL database is configured to use InnoDB engine by default. You can add the innodb_force_recovery=1 option in the main MySQL configuration file at installdir/mysql/etc/my.cnf to try and fix the database:
Start the MySQL database with the following command:
Open a new console and try to log in to the database:
In this case, the error was related to the mysql.user table. Run these commands:
If the table is recovered, you should see “OK” in the mysql.user status table. Do not forget to remove the innodb_force_recovery option from the my.cnf file and restart the MySQL server again.
MariaDB
The MariaDB database is configured to use InnoDB engine by default. You can add the innodb_force_recovery=1 option in the main MariaDB configuration file at installdir/mariadb/my.cnf to try and fix the database:
Start the MariaDB database with the following command:
Open a new console and try to log in to the database:
In this case, the error was related to the mysql.user table. Run these commands:
If the table is recovered, you should see “OK” in the mysql.user status table. Do not forget to remove the innodb_force_recovery option from the my.cnf file and restart the MariaDB server again.
If you find a different error or cannot fix an issue, we can try to help at http://community.bitnami.com.
NOTE: We are in the process of modifying the file structure and configuration for many Bitnami stacks. On account of these changes, the file paths stated in this guide may change depending on whether your Bitnami stack uses native Linux system packages (Approach A), or if it is a self-contained installation (Approach B). To identify your Bitnami installation type and what approach to follow, run the command below:
The output of the command indicates which approach (A or B) is used by the installation, and will allow you to identify the paths, configuration and commands to use in this guide. Refer to the FAQ for more information on these changes.
NOTE: We are in the process of modifying the configuration for many Bitnami stacks. On account of these changes, the file paths and commands stated in this guide may change depending on whether your Bitnami stack uses MySQL or MariaDB. To identify which database server is used in your stack, run the command below:
Teldat driver download for windows 10. The output of the command indicates which database server (MySQL or MariaDB) is used by the installation, and will allow you to identify which guides to follow in our documentation for common database-related operations.
Default MariaDB user accounts and privileges
The grant tables define the initial MariaDB user accounts and their access privileges. The default configuration consists of:
- A privileged account with a username of root. The root user has remote access to the database.
- An anonymous user without remote access to the database server. This user can only connect from the local machine and it is only intended for testing.
- A test database only intended for testing.
Check our recommendations for a production server.
MariaDB version
In order to check the MariaDB version, execute the following command:
MariaDB port
The default port for MariaDB is 3306.
MariaDB configuration file
Bitnami Appname Stack
The MariaDB configuration file is located at one of the following locations, on the MariaDB database server host:
- For Bitnami installations following Approach A (using Linux system packages): installdir/mariadb/conf/my.cnf
- For Bitnami installations following Approach B (self-contained installations): installdir/mariadb/my.cnf
The MariaDB official documentation has more details about how to configure the MariaDB database.
Bitnami Coppermine Stack 3
MariaDB log file
The log-error file contains information indicating when MariaDB was started and stopped and also any critical errors that occur while the server is running. If MariaDB notices a table that needs to be automatically checked or repaired, it writes a message to the error log.
Find it at one of the following locations, on the MariaDB database server host:
Bitnami Coppermine Stacker
- For Bitnami installations following Approach A (using Linux system packages): installdir/mariadb/logs/mysqld.log
- For Bitnami installations following Approach B (self-contained installations): installdir/mariadb/data/mysqld.log